Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Liste de Produits
marque: CHM
Détails d'emballage: Paquet Standard D'exportation Maritime
productivité: 5000T/Year
transport: Ocean,Air
Lieu d'origine: Chine
Soutenir: 3000T/Year
Certificats : ISO
Code SH: 7307930000
Hafen: TIANJIN,SHANGHAI,QINGDAO
Type de paiement: L/C,T/T,Paypal,Western Union
Incoterm: FOB,CFR,CIF
Bienvenue à consulter notre Raccord de tuyau en alliage tel que coude basse température , té en acier allié , capuchon en alliage , réducteur en alliage
Notre coude de raccords de tuyauterie est conforme à la norme ASME B16.9. Le coude ASME B16.9 est principalement utilisé pour le raccordement de raccords de tuyauterie dans une installation de tuyauterie.
sert également à raccorder le coude du tuyau, connectez deux tubes du même diamètre de diamètre nominal et faites tourner la ligne de 90 ° ou d’autres angles.
Les caractéristiques de l' acier allié Elbo w est une pollution anti-chimique, non toxique et bactériostatique, respectueuse de l'environnement, respectueuse de l'environnement,
wading sécurité alimentaire, résistance à l'oxygène et réduction du bruit, transport de fluide ultra-silencieux, isolation thermique,
Les dommages thermiques ne représentent que 1/200 de la chaussée métallique. Le transport du coude en acier allié est lisse et ne s’adapte pas facilement.
le long du coefficient de frottement est seulement 0,007.
MODEL | 1. Elbow(90DEG,45DEG,180DEG,30DEG,60DEG) LR and SR |
2. Tee(Straight or Equal and Reducing) | |
3. Reducer(Concentric and Eccentric) | |
4. Cap | |
Size | Seamless (SMLS) fittings: 1/2"-24", DN15-DN600. |
Welded fittings (seam) 26"-100", DN650-DN2500. | |
We also accept customized type | |
Thickness |
SCH10,SCH20,SCH30, SCH STD, SCH40, SCH60, SCHXS, SCH80, SCH100, SCH120, SCH140, SCH160, SCH XXS. |
Connection Type | Butt Welded |
HS CODE | 7307930000 |
Standard | ASME, ANSI B16.9 |
JIS B2311/2312/2313 | |
DIN2605 | |
GB12459;GB/T13401 | |
GOST 17375 | |
we can also produce according to drawing and standards provided by customers. | |
Material | ASTM A234 WP11; wp12; WP22; WP5; WP9; WP91; WP911; ASTM A420 WPL6 |
16Mn; Q345B | |
ST52;ST52.4 | |
Surface | Black or Yellow painting or Customized painting |
Applications |
Petroleum, chemical, machinery, boiler, electric power, shipbuilding, construction, etc |
Main Market |
Turkey, Italy, France, Spain, South Africa, Moroco, Dubai, Iran, Syria, Singapore, Vietnam, Austria, USA, Canada, Mexico, Korea, Thailand, India, Bulgaria, Russia and so on |
Certificate | ISO9001-2008, |
Delivery time |
30days after receipt of advanced payment or original LC ,Common size large quantity in stock |
Payment term | T/T, L/C |
Inspection | Factory In-House Check or The Third Party Inspection |
Packaging | Plywood Pallets/ Wooden Case Or As Per customer's request |
MOQ | No Limit |
Technics | Hot Forming |
Origin | China |
Sample | Sample can be free, but customer have to pay transport cost |
Chemical Composition (%) of ASTM A420 |
|
|||||
Grade | C | Mn | P | S | Si |
|
WPL6(1)(2) | 0.3 |
0.60-1.35 |
0.035 | 0.04 |
0.15-0.30 |
|
Grade | Ni | Cu | Cr | Mo | V | Nb |
WPL6(1)(2) | 0.4 | 0.4 | 0.3 | 0.12 | 0.08 | 0.02 |
GENERAL NOTE: |
|
|
|
|
|
|
All values are maximum unless otherwise indicated. | ||||||
NOTES: |
|
|
|
|
|
|
(1) For each reduction of 0.01% C below 0.30%, an increase of 0.05% Mn above 1.06% will be permitted, up to a maximum of 1.35%. |
||||||
(2) Fittings made from forgings may have 1.35% max Mn. | ||||||
|
|
|
|
|
|
|
Mechanical properties of ASTM A420 |
|
|||||
Tensile Requirements | WPL6 |
|
|
|
|
|
Tensile Strength |
60-85 [415-585] |
|
|
|
|
|
min, ksi [MPa] |
|
|
|
|
||
Yield Strength | 35[240] |
|
|
|
|
|
min, ksi [MPa] |
|
|
|
|
||
Where the wall thickness lies between two values above, the min elongation value is determined by the following equations: |
||||||
Longitudinal E=48t+15.00,E=48t+13.00 |
|
|
|
|
|
|
Transverse E=32t+6.50,E=32t+8.00 |
|
|
|
|
|
|
E = elongation in 2in [50mm], % |
|
|
|
|
|
|
t = actual thickness of specimen, in [mm] |
|
|
|
|
|
|
Groupes de Produits : Raccord de tuyau > Coude en alliage
Accueil > Liste de Produits > Raccord de tuyau > Coude en alliage > Raccords de tuyauterie A420WPL6 de coude basse température ASME B16.9
Envoyer Une Demande
Mr. Leon
E-mail :
Envoyer Une Demande Numéro De Téléphone:86-317-5692988
Fax:86-317-3200656
E-mail :
Adresse De Compagnie:BUILDING NO.1 GULOU XINHUA DISTRICT, Cangzhou, Hebei
site mobile
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.